You are right, lirc is not running, I mistook eventlircd for lircd. I don’t recall trying my hvr on linux. IR sensor is plugged into one of them. Thanks for your time. Do you already have an account? I copied existing ir. About The Project The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

Uploader: Kigar
Date Added: 7 January 2016
File Size: 41.69 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45075
Price: Free* [*Free Regsitration Required]

The new lirc is less than a year old and the internet is full of 20 year old tutorials that no longer work.

Hauppauge PCI-e Tuner with IR Receiver ?

Uninstall WinTV if you have that installed. This setup worked for many years.

So the above described e2 error seems to be spurious and does not have anything to do with IR remote functionality. My second STV machine smaller and still running 7 generates the same error from ir.


October 28, 5. Other keys are either ignored or cause an escape from this screen.

JulioQc November 20, If you ever come to Ontario, give me a buzz. October 27, 3.

Download it in the Play-Store now! All times are GMT Originally Posted by fbures Canada. Originally Posted by fbures Thanks. I think ” systemctl start lircd” is the command, or something like that. Here is redeiver output as per your specification above. PaoloROctober 14, October 24, 2. The same for remote mouse. I think it usually goes with whatever was installed last. Just to add to my previous post: I have tried the following versions and same result in all three 1.

Remote IR Hauppauge | MediaPortal HTPC

So the tveeprom section sees that there is a IR receiver but that never shows up in input devices as below The HVR card has an IR transmitter as well, but that is not recognised I don’t use it, so don’t mind. Log in or Sign up to hide all adverts. Hauppage remote stopped working after Win10 update today Well, I ran Win10 updates today, rebooted and my Hauppauge IR remote does not work any more.


Any other advice would be greatly appreciated. How do I troubleshoot a favorite not recording? It says to me: Yes, my password is: October 25, Messages: I did check if the firmware was available on the default 7.

October 14, 1. To clear this message, click the huppauge X in the upper left corner.

Hauppauge Webstore | IR receiver cable for the WinTV-HVR/WinTV-HVR

Hauppage remote stopped working after Win10 update today. The eeprom on the TV card is reporting that there is a ir receiver attached to it because it was programmed with that information. To control STV from a remote keyboard is possible but very awkward.