ASURO USB DRIVER DOWNLOAD

Fortunately, you can use the ATmega8 from any Arduino board instead. Because the ATmega8 is in the Asuro, not the Arduino board, you need to use the switch on the robot instead of the reset button on the board. Depending on which button s that are pressed, different resistors are connected on the asuro PCB and an unique analogue signal will return to analogue in 4, defining the buttons pressed. An Arduino library and a modified bootloader is also available, based on these sketch. Sources for Electronic Parts. You need to solder a couple of extra wires onto the Asuro to program it. For more info pleae look at this Forum Post.

Uploader: Zulujind
Date Added: 5 January 2005
File Size: 58.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3714
Price: Free* [*Free Regsitration Required]

ASURO USB adapter

Connect the wires to the right pins. Since the Asuro robot runs at half the speed of the Arduino board 8 MHz instead of 16 MHzyou’ll need to change a couple of files in your Arduino preferences file you may want to make a backup of the original file first:. Front button detection Checking the front buttons is made by sending voltage from digital out 3, and reading analogue in 4. For more awuro pleae look at this Forum Post. Turn the Asuro robot on just before pressing the upload button in the Arduino environment.

  F917000 SCANNER DRIVER

Odometric speed control Odometric infrared LED: Changing Arduino Preferences Since the Asuro robot runs at half the speed of the Arduino board 8 MHz instead of 16 MHzyou’ll need to change a couple of files in your Arduino preferences file you may want to make a backup of the original file first: Depending on which button s that are pressed, different resistors are connected on the asuro PCB and an unique analogue signal will return to analogue in 4, defining the buttons pressed.

Uab on other Chips. Fortunately, you can use the ATmega8 from any Arduino board instead.

Arduino Playground – Asuro

This Asuro wiki in German has more information. Take the ATmega8 out of the Asuro keep it around, because it’s programmed with a useful self-test.

The ATmega8 that comes with the Asuro robot uses an undocumented protocol to upload programs asuuro is locked so you can’t change it, meaning you couldn’t use Arduino to upload programs to it. Follow the instructions in the Asuro manual which is also on the CD that comes with the Asuro.

The normal serial commands from the reference should work. Arduino sketch for simple controls: An Arduino library and a modified bootloader is also available, based on these sketch. Sources for Electronic Parts.

ASURO ARX-USB

The other wire goes to ground on the Arduino board. Connect the USB cable to the Arduino board and the computer. Checkout the Asurl page for further information.

  HP VOODOODNA MOUSE DRIVER DOWNLOAD

Related Hardware and Initiatives. Replacing the ATmega8 The ATmega8 that comes with the Asuro robot uses an undocumented protocol to upload asueo and is locked so you can’t change it, meaning you couldn’t use Arduino to upload programs to it.

ASURO ARX-USB: ASURO USB-IR transceiver at reichelt elektronik

The playground is a publicly-editable wiki about Arduino. Asugo the ATmega8 out of an Arduino board and place it in the Asuro make sure it’s the right way around.

Because the ATmega8 is in the Asuro, not the Arduino board, you need to use the switch on the robot instead of the reset button on the board.

Board Setup and Configuration. If it doesn’t work, try switching the wires that go to pins 0 and 1 on the Arduino board. You can upload programs straight from the Arduino environment.

Right motor direction Forward: You need to solder a couple of extra wires onto the Asuro to program it.